In this article we will take a closer look at Eurosilicone breast implants. Let's find out what types, shells, forms and fillers there are. We will also figure out how mammoplasty is done and what the recovery time is after it. In addition, we will get acquainted with the opinions of specialists, patient reviews and show the results in photos before and after the operation.
Eurosilicone breast implants
Shell
The shell of the implants is called “Nusil” and consists of several layers, performing a protective function. The elastomer coating is very durable and can even withstand significant stretching. Below it is a Paragel 360 barrier layer that protects the gel from diffusion.
The protective layer of Eurosilicone implants minimizes gel diffusion
Types of shell surfaces:
- Smooth. It has a thin capsule and gives the breasts natural softness. Such implants do not take root as quickly as textured ones.
- Micro-textured Cristalline. This shell is finely rough, adheres better to surrounding tissues, and reduces the likelihood of capsular contracture formation.
- Textured Cristalline. The coarse rough surface of the shell reduces the risk of complications.
Microtextured or textured surface under a microscope
Salt crystals of different sizes are used to create texture. The microtextured shell is obtained by a single application, while the textured shell is obtained by double application.
Filler
Types of fillers:
- Gel. Paragel implants are filled with cohesive gel of varying densities. With this filler, the breasts have natural contours and there is less chance of deformation. The higher the cohesiveness index, the denser the filler. When ruptured, the contents do not spill out. The dense texture retains its shape. The main disadvantages are large postoperative scars and high cost.
- Saline. Inflatable implants are filled with sodium chloride solution. They are used for patients who have a large mass of breast tissue. They are affordable and require a small incision during surgery. A shell is placed under the mammary gland and then filled with a solution. The disadvantages include the likelihood of displacement and deformation of the implant.
- Combined. The implant has an inner shell with gel and an outer shell with saline solution, this avoids deformation.
BellaGel implants
BellaGel breast implants are manufactured by HANSBiomed Corp., which has been developing and introducing medical products into production since 2001. It is located in Seoul, Republic of Korea and is part of the medical equipment and consumables industry. Hans Biomed has 318 employees and sales of US$67.28 million. The corporate family includes six companies.
Today, its structure includes headquarters, a tissue engineering laboratory and production facilities with a total area of 5950 sq.m. HansBiomedCorp. develops and improves materials for silicone implants and tissues for allotransplantation.
The company's main activities are biotechnology. Medical products are certified according to European, Chinese and Russian quality standards. Production complies with FDA ISO requirements. BellaGel breast implants are the first among Asian manufacturers to receive European quality certificates and CE marking. Control over the production of endoprostheses occurs at all stages of the technological process.
The production uses silicone from Applied Silicone Corp., whose products are approved by the FDA (US Food and Drug Administration) and recognized as safe for use in the medical field.
Features of BellaGel implants include a multilayer shell, which is resistant to mechanical stress and prevents the filler components from sweating.
The sheath is manufactured from FDA Master File PDMS. The smooth implant shell has a five-layer structure. Textured endoprostheses have six of these layers. The filler of the implants consists of 95% cohesive gel. Refers to a high-density gel with good “shape memory,” thereby ensuring rapid restoration of the implant after compression or pressure.
Forms (types)
Implants can be round, anatomical, and expanders are a separate group.
Anatomical (drop-shaped) implants – Matrix Eurosilicone
Peculiarities:
- 9 types, 102 different modifications allow you to choose the best option;
- a unique preoperative planning system makes it possible to select the best implant size;
- Height options are determined by measuring the distance from the nipple to the jugular fossa. The following abbreviations for height are used in the Matrix: TM F - full, TM M - medium, TM L - low;
- profile options in the matrix are indicated by numbers: 1 - low, 2 - medium, 3 - high;
- allow you to choose the volume at the request of the client;
- natural gel;
- texture using Cristalline technology;
- Paragel 360 protective layer.
9 types of implants Matrix Eurosilicone
Round implants Eurosilicone
Round implants have 11 types and 219 variations with different shells and fillers.
Peculiarities:
- different profiles allow you to choose the appropriate size;
- surface: smooth or micro-textured;
- gel: soft or naturally cohesive;
- Paragel 360 protective layer.
Smooth shell available with soft gel. In the matrix, implants are designated:
- ES 26 - low profile;
- ES 261 - medium;
- ES 28 - high;
- ES 281 - extra high.
Micro-textured shell with natural gel available in the following profiles:
- ES 802 N - medium;
- ES 805N - medium extra high;
- ES 812N - extra high.
Micro-textured soft gel shell:
- ES 80 - low profile;
- ES 801 - medium;
- ES 81 - high;
- ES 811 - extra high.
Types of round implants Eurosilicone
Tissue expanders Eurosilicone
Tissue expanders are used in preparation for breast reconstruction surgery. Suitable for use with anatomical implants.
Peculiarities:
- 3 types, 16 modifications;
- variable height;
- high projection;
- the presence of a magnetic port with the functions of needle stop and self-sealing;
- reinforced first layer;
- easy location of the valve thanks to an external device.
Types of tissue expanders Eurosilicone
EUROSILICONE
The EUROSILICONE brand, a leading developer and manufacturer of breast implants, was founded in 1988. Over the course of 20 years of existence on the global market, EUROSILICONE implants have established themselves as a high-quality and safe product. In addition to implants, it produces tissue expanders.
The implant production plant is located in France, in the city of Apt. The manufacture of implants is carried out using modern equipment that meets the latest technology. The supplier of raw materials for implants, namely liquid silicone, is the American manufacturer Newsil. In terms of sales volume, EUROSILICONE implants occupy a leading position: first place in Europe and third place in the world.
The company's annual product turnover is more than 800,000 pairs of implants, which are supplied to 140 countries.
EUROSILICONE implants are safe and meet all the requirements of the international ISO standard and EU standards. They have all the necessary quality certificates and are approved by the Ministry of Health of the Russian Federation for use in Russia.
provides the widest selection of implant models to satisfy the wishes of every patient.
Shell
The implant shell consists of several layers.
Each layer has its own function: some layers are responsible for the strength of the shell, others for elasticity. The protective function is performed by the Nusil shell. The PARAGEL protective layer production technology prevents the gel from leaking. Characteristic:
1. Three-layer shell (shell thickness 400-700 microns) 2. Nusil protective shell consists of high-quality elastomer. 3. The barrier layer of the shell prevents the gel from sweating. 4. Expansion capacity over 500%
The most superficial layer is specially prepared for applying texture.
Texture
CRISTALLINE texture is a unique technology for texturing the shell of EUROSILICONE products.
Texturing technology involves applying salt crystals of a certain size to the hot shell of the implant.
The method of obtaining a textured shell for round and anatomical implants is different.
Round implants are sprinkled with salt once and then treated in an oven. Shell Anatomical implants are salted twice and oven baked twice.
Surface
- Smooth
- Micro-textured Cristalline
- textured Cristalline
The company produces implants of both anatomical and round shapes, filled with highly cohesive silicone gel, which does not leak if the implant is damaged.
Round implants
The collection of round implants "EUROSILICONE" is represented by 59 types of implants of various profiles.
Round implants have several profiles:
- low profile,
- average profile,
- high profile
- ultra high profile.
This number of profiles in combination with different volumes of implants allows for the widest choice of options for breast correction.
Surface of round implants:
- smooth
- textured
The following is used as a filler in round implants:
- soft cohesive gel
- natural cohesive gel
1.Paragel Permanent implants are round in shape with a smooth surface. They have two profiles: low and high
2.Cristalline Paragel Permanent implants of a round shape with a microtextured surface that promotes good engraftment to the tissue. Inside the outer layer of the implant there is an impermeable liner that prevents the gel from leaking. They have several profiles: low, medium, high, extra high.
3.Sculpturale Paragel Collections:
Natural cohesive gel, textured shell
- 3 profiles: Medium, Medium Extra High and Extra High
- 59 configurations
- Shell – Micro-textured Cristalline
- 100% filling.
- highly cohesive silicone gel that retains its shape
- Paragel 360 protective layer?
- Crystalline texture
ES 802N Middle profile Cristalline Paragel
| vendor code | Diameter | Projection | Volume | Sizer Gel Saline solution |
| 802100N | 8.5 | 2.8 | 100 | 35R100 30100 |
| 802120N | 9.0 | 2.9 | 120 | 35R120 30120 |
| 802140N | 9.3 | 3.2 | 140 | 35R140 30140 |
| 802160N | 10.0 | 3.1 | 160 | 35R160 30160 |
| 802180N | 10.6 | 3.2 | 180 | 35R180 30180 |
| 802200N | 11.1 | 3.3 | 200 | 35R200 30200 |
| 802220N | 11.5 | 3.5 | 220 | 35R220 30220 |
| 802240N | 11.7 | 3.5 | 240 | 35R240 30240 |
| 802260N | 11.9 | 3.6 | 260 | 35R260 30260 |
| 802280N | 12.3 | 3.7 | 280 | 35R280 30280 |
| 802300N | 12.4 | 3.9 | 300 | 35R300 30300 |
| 802325N | 12.7 | 4.0 | 325 | 35R325 30325 |
| 802350N | 13.0 | 4.0 | 350 | 35R350 30350 |
| 802375N | 13.3 | 3.4 | 375 | 35R375 30375 |
| 802400N | 13.7 | 4.2 | 400 | 35R400 30400 |
| 802450N | 14.1 | 4.4 | 450 | 35R450 30450 |
| 802500N | 14.5 | 4.6 | 500 | |
| 802550N | 15.0 | 4.8 | 550 | |
| 802600N | 15.8 | 4.5 | 600 | |
| 802650N | 15.8 | 4.9 | 650 | |
| 802700N | 15.8 | 5.4 | 700 | |
| 802750N | 15.9 | 5.8 | 750 | |
| 802800N | 15.8 | 6.0 | 800 |
ES 805N Medium Extra High Profile
| vendor code | Diameter(cm) | Projection(cm) | Volume (ml) |
| 805170N | 9.9 | 3.4 | 170 |
| 805195N | 10.5 | 3.5 | 195 |
| 805215N | 10.6 | 3.7 | 215 |
| 805240N | 11.4 | 3.7 | 240 |
| 805265N | 11.4 | 3.9 | 265 |
| 805290N | 11.8 | 4.0 | 290 |
| 805310N | 12.0 | 4.1 | 310 |
| 805335N | 12.1 | 4.3 | 335 |
| 805360N | 12.5 | 4.4 | 360 |
| 805390N | 12.8 | 4.6 | 390 |
| 805420N | 13.0 | 4.7 | 420 |
| 805450N | 13.2 | 4.8 | 450 |
| 805480N | 13.9 | 4.9 | 480 |
ES 812N Extra High Profile Cristalline Paragel
| vendor code | Diameter | Projection | Volume | Sizer gel saline solution |
| 812100N | 7.3 | 3.4 | 100 | 37R100 33100 |
| 812120N | 8.0 | 3.5 | 120 | 37R120 33120 |
| 812140N | 8.5 | 3.8 | 140 | 37R140 33140 |
| 812160N | 8.8 | 3.9 | 160 | 37R160 33160 |
| 812180N | 9.1 | 4.3 | 180 | 37R180 33180 |
| 812200N | 9.4 | 4.3 | 200 | 37R200 33200 |
| 812220N | 9.7 | 4.4 | 220 | 37R220 33220 |
| 812240N | 10.2 | 4.4 | 240 | 37R240 33240 |
| 812260N | 10.4 | 4.5 | 260 | 37R260 33260 |
| 812280N | 10.6 | 4.7 | 280 | 37R280 33280 |
| 812300N | 10.8 | 4.9 | 300 | 37R300 33300 |
| 812325N | 11.0 | 5.1 | 325 | 37R325 33325 |
| 812350N | 11.3 | 5.1 | 350 | 37R350 33350 |
| 812375N | 11.6 | 5.2 | 375 | 37R375 33375 |
| 812400N | 11.8 | 5.5 | 400 | 37R400 33400 |
| 812450N | 12.1 | 5.7 | 450 | 37R450 33450 |
| 812500N | 12.3 | 6.1 | 500 | |
| 812550N | 12.5 | 6.4 | 550 | |
| 812600N | 13.1 | 6.4 | 600 | |
| 812650N | 13.6 | 6.4 | 650 | |
| 812700N | 13.4 | 7.1 | 700 | |
| 812750N | 13.5 | 7.4 | 750 | |
| 812800N | 13.6 | 7.7 | 800 |
Soft cohesive gel, textured shell
- 4 profiles: Low, Medium, High and Extra High
- 80 configurations
- Shell – Micro-textured Cristalline
- Soft cohesive gel that retains its shape
- Protective layer Paragel 360
ES 80 Low profile, 85% infill Cristalline Paragel
| vendor code | Diameter | Projection | Volume | Sizer Gel Saline solution |
| 80100 | 9.6 | 2.0 | 100 | 35M100 30100 |
| 80120 | 9.7 | 2.4 | 120 | 35M120 30120 |
| 80140 | 10.2 | 2.5 | 140 | 35M140 30140 |
| 80160 | 10.4 | 2.8 | 160 | 35M160 30160 |
| 80180 | 10.9 | 2.9 | 180 | 35M180 30180 |
| 80200 | 11.6 | 2.8 | 200 | 35M200 30200 |
| 80220 | 11.8 | 3.0 | 220 | 35M220 30220 |
| 80240 | 12.0 | 3.1 | 240 | 35M240 30240 |
| 80260 | 12.2 | 3.3 | 260 | 35M260 30260 |
| 80280 | 12.5 | 3.3 | 280 | 35M280 30280 |
| 80300 | 12.9 | 3.4 | 300 | 35M300 30300 |
| 80325 | 13.2 | 3.5 | 325 | 35M325 30325 |
| 80350 | 13.5 | 3.6 | 350 | 35M350 30350 |
| 80375 | 13.8 | 3.7 | 375 | 35M375 30375 |
| 80400 | 14.2 | 3.7 | 400 | 35M400 30400 |
| 80450 | 14.7 | 3.8 | 450 | 35M450 30450 |
| 80500 | 15.3 | 4.0 | 500 |
ES 801 Medium profile, 100% filled Cristalline Paragel
| vendor code | Diameter | Projection | Volume | Sizer Gel Saline solution |
| 801100 | 8.5 | 2.8 | 100 | 35R100 30100 |
| 801120 | 9.0 | 2.9 | 120 | 35R120 30120 |
| 801140 | 9.3 | 3.2 | 140 | 35R140 30140 |
| 801160 | 10.0 | 3.1 | 160 | 35R160 30160 |
| 801180 | 10.6 | 3.2 | 180 | 35R180 30180 |
| 801200 | 11.1 | 3.3 | 200 | 35R200 30200 |
| 801220 | 11.5 | 3.2 | 220 | 35R220 30220 |
| 801240 | 11.7 | 3.5 | 240 | 35R240 30240 |
| 801260 | 11.9 | 3.6 | 260 | 35R260 30260 |
| 801280 | 12.3 | 3.7 | 280 | 35R280 30280 |
| 801300 | 12.4 | 3.9 | 300 | 35R300 30300 |
| 801325 | 12.7 | 4.0 | 325 | 35R325 30325 |
| 801350 | 13.0 | 4.0 | 350 | 35R350 30350 |
| 801375 | 13.3 | 4.2 | 375 | 35R375 30375 |
| 801400 | 13.7 | 4.2 | 400 | 35R400 30400 |
| 801450 | 14.1 | 4.4 | 450 | 35R450 30450 |
| 801500 | 14.5 | 4.6 | 500 | |
| 801550 | 15.0 | 4.8 | 550 | |
| 801600 | 15.8 | 4.5 | 600 | |
| 801650 | 15.8 | 4.9 | 650 | |
| 801700 | 15.8 | 5.4 | 700 | |
| 801750 | 15.9 | 5.8 | 750 | |
| 801750 | 15.8 | 6.0 | 800 |
ES 81 High profile, 85% infill Cristalline Paragel
| vendor code | Diameter | Projection | Volume | Sizer Gel Saline solution |
| 81100 | 7.9 | 2.9 | 100 | 37M100 33100 |
| 81120 | 8.9 | 2.8 | 120 | 37M120 33120 |
| 81140 | 8.8 | 3.2 | 140 | 37M140 33140 |
| 81160 | 9.3 | 3.3 | 160 | 37M160 33160 |
| 81180 | 9.5 | 3.6 | 180 | 37M140 33140 |
| 81200 | 9.9 | 3.7 | 200 | 37M200 33200 |
| 81220 | 10.3 | 3.7 | 220 | 37M220 33220 |
| 81240 | 10.5 | 3.9 | 240 | 37M240 33240 |
| 81260 | 10.7 | 4.1 | 260 | 37M260 33260 |
| 81280 | 10.9 | 4.3 | 280 | 37M280 33280 |
| 81300 | 11.1 | 4.4 | 300 | 37M300 33300 |
| 81325 | 11.4 | 4.5 | 325 | 37M325 33325 |
| 81350 | 11.7 | 4.7 | 350 | 37M350 33350 |
| 81375 | 11.7 | 4.9 | 375 | 37M375 33375 |
| 81400 | 12.2 | 4.9 | 400 | 37M400 33400 |
| 81450 | 12.5 | 5.3 | 450 | 37M450 33450 |
| 81500 | 12.6 | 5.8 | 500 |
ES 811 Extra high profile, 100% Cristalline Paragel filling
| vendor code | Diameter | Projection | Volume | Sizer Gel Saline solution |
| 811100 | 7.3 | 3.4 | 100 | 37R100 33100 |
| 811120 | 8.0 | 3.5 | 120 | 37R120 33120 |
| 811140 | 8.5 | 3.8 | 140 | 37R140 33140 |
| 811160 | 8.8 | 3.9 | 160 | 37R160 33160 |
| 811180 | 9.1 | 4.3 | 180 | 37R180 33180 |
| 811200 | 9.4 | 4.3 | 200 | 37R200 33200 |
| 811220 | 9.7 | 4.4 | 220 | 37R220 33220 |
| 811240 | 10.2 | 4.4 | 240 | 37R240 33240 |
| 811260 | 10.4 | 4.5 | 260 | 37R260 33260 |
| 811280 | 10.6 | 4.7 | 280 | 37R280 33280 |
| 811300 | 10.8 | 4.9 | 300 | 37R300 33300 |
| 811325 | 11.0 | 5.1 | 325 | 37R325 33325 |
| 811350 | 11.3 | 5.1 | 350 | 37R350 33350 |
| 811375 | 11.6 | 5.2 | 375 | 37R375 33375 |
| 811400 | 11.8 | 5.5 | 400 | 37R400 33400 |
| 811450 | 12.1 | 5.7 | 450 | 37R450 33450 |
| 811500 | 12.3 | 6.1 | 500 | |
| 811550 | 12.5 | 6.4 | 550 | |
| 811600 | 13.1 | 6.4 | 600 | |
| 811650 | 13.6 | 6.4 | 650 | |
| 811700 | 13.4 | 7.1 | 700 | |
| 811750 | 13.5 | 7.4 | 750 | |
| 811800 | 13.6 | 7.7 | 800 |
Soft cohesive gel, smooth shell
- 4 profiles: Low, Medium, High and Extra High
- 80 configurations.
- Cohesive gel that retains its shape
- Paragel 360 protective layer?
- Smooth shell
ES 26 Low profile, 85% Paragel fill
| vendor code | Diameter | Projection | Volume | Sizer Gel Saline solution |
| 26100 | 9.6 | 2.0 | 100 | 35M100 30100 |
| 26120 | 9.7 | 2.4 | 120 | 35M120 30120 |
| 26140 | 10.2 | 2.5 | 140 | 35M140 30140 |
| 26160 | 10.4 | 2.8 | 160 | 35M160 30160 |
| 26180 | 10.9 | 2.9 | 180 | 35M180 30180 |
| 26200 | 11.6 | 2.8 | 200 | 35M200 30200 |
| 26220 | 11.8 | 3.0 | 220 | 35M220 30220 |
| 26240 | 12.0 | 3.1 | 240 | 35M240 30240 |
| 26260 | 12.2 | 3.3 | 260 | 35M260 30260 |
| 26280 | 12.5 | 3.3 | 280 | 35M280 30280 |
| 26300 | 12.9 | 3.4 | 300 | 35M300 30300 |
| 26325 | 13.2 | 3.5 | 325 | 35M325 30325 |
| 26350 | 13.5 | 3.6 | 350 | 35M350 30350 |
| 26375 | 13.8 | 3.7 | 375 | 35M375 30375 |
| 26400 | 14.2 | 3.7 | 400 | 35M400 30400 |
| 26450 | 14.7 | 3.8 | 450 | 35M450 30450 |
| 26500 | 15.3 | 4.0 |
ES 261 Medium profile, 100% Paragel filling
| vendor code | Diameter | Projection | Volume | Sizer Gel Saline solution |
| 261100 | 8.5 | 2.8 | 100 | 35R100 30100 |
| 261120 | 9.0 | 2.9 | 120 | 35R120 30120 |
| 261140 | 9.3 | 3.2 | 140 | 35R140 30140 |
| 261160 | 10.0 | 3.1 | 160 | 35R160 30160 |
| 261180 | 10.6 | 3.2 | 180 | 35R180 30180 |
| 261200 | 11.1 | 3.3 | 200 | 35R200 30200 |
| 261220 | 11.5 | 3.2 | 220 | 35R220 30220 |
| 261240 | 11.7 | 3.5 | 240 | 35R240 30240 |
| 261260 | 11.9 | 3.6 | 260 | 35R260 30260 |
| 261280 | 12.3 | 3.7 | 280 | 35R280 30280 |
| 261300 | 12.4 | 3.9 | 300 | 35R300 30300 |
| 261325 | 12.7 | 4.0 | 325 | 35R325 30325 |
| 261350 | 13.0 | 4.0 | 350 | 35R350 30350 |
| 261375 | 13.3 | 4.2 | 375 | 35R375 30375 |
| 261400 | 13.7 | 4.2 | 400 | 35R400 30400 |
| 261450 | 14.1 | 4.4 | 450 | 35R450 30450 |
| 261500 | 14.5 | 4.6 | 500 | |
| 261550 | 15.0 | 4.8 | 550 | |
| 261600 | 15.8 | 4.5 | 600 | |
| 261650 | 15.8 | 4.9 | 650 | |
| 261700 | 15.8 | 5.4 | 700 | |
| 261750 | 15.9 | 5.8 | 750 | |
| 261800 | 15.8 | 6.0 | 800 |
ES 28 High profile, 85% Paragel filling
| vendor code | Diameter | Projection | Volume | Sizer Gel Saline solution |
| 28100 | 7.9 | 2.9 | 100 | 37M100 33100 |
| 28120 | 8.9 | 2.8 | 120 | 37M120 33120 |
| 28140 | 8.8 | 3.2 | 140 | 37M140 33140 |
| 28160 | 9.3 | 3.3 | 160 | 37M160 33160 |
| 28180 | 9.5 | 3.6 | 180 | 37M180 33180 |
| 28200 | 9.9 | 3.7 | 200 | 37M200 33200 |
| 28220 | 10.3 | 3.7 | 220 | 37M220 33220 |
| 28240 | 10.5 | 3.9 | 240 | 37M240 33240 |
| 28260 | 10.7 | 4.1 | 260 | 37M260 33260 |
| 28280 | 10.9 | 4.3 | 280 | 37M280 33280 |
| 28300 | 11.1 | 4.4 | 300 | 37M300 33300 |
| 28325 | 11.4 | 4.5 | 325 | 37M325 33325 |
| 28350 | 11.7 | 4.7 | 350 | 37M350 33350 |
| 28375 | 11.7 | 4.9 | 375 | 37M375 33375 |
| 28400 | 12.2 | 4.9 | 400 | 37M400 33400 |
| 28450 | 12.5 | 5.3 | 450 | 37M450 33450 |
| 28500 | 12.6 | 5.8 | 500 |
ES 281 Ultra high profile, 100% Paragel infill
| vendor code | Diameter | Projection | Volume | Sizer Gel saline solution |
| 281100 | 7.3 | 3.4 | 100 | 37R100 33100 |
| 281120 | 8.0 | 3.5 | 120 | 37R120 33120 |
| 281140 | 8.5 | 3.8 | 140 | 37R140 33140 |
| 281160 | 8.8 | 3.9 | 160 | 37R160 33160 |
| 281180 | 9.1 | 4.3 | 180 | 37R180 33180 |
| 281200 | 9.4 | 4.3 | 200 | 37R200 33200 |
| 281220 | 9.7 | 4.4 | 220 | 37R220 33220 |
| 281240 | 10.2 | 4.4 | 240 | 37R240 33240 |
| 281260 | 10.4 | 4.5 | 260 | 37R260 33260 |
| 281280 | 10.6 | 4.7 | 280 | 37R280 33280 |
| 281300 | 10.8 | 4.9 | 300 | 37R300 33300 |
| 281325 | 11.0 | 5.1 | 325 | 37R325 33325 |
| 281350 | 11.3 | 5.2 | 350 | 37R350 33350 |
| 281375 | 11.6 | 5.5 | 375 | 37R375 33375 |
| 281400 | 11.8 | 5.7 | 400 | 37R400 33400 |
| 281450 | 12.1 | 6.1 | 450 | 37R450 33450 |
| 281500 | 12.3 | 6.4 | 500 | |
| 281550 | 12.5 | 6.4 | 550 | |
| 281600 | 13.1 | 6.4 | 600 | |
| 281650 | 13.6 | 6.4 | 650 | |
| 281700 | 13.4 | 7.1 | 700 | |
| 281750 | 13.5 | 7.4 | 750 | |
| 281800 | 13.6 | 7.7 | 800 |
Anatomical implants
also presents a wide range of anatomically shaped implants.
Today, three groups of anatomical implants are known:
- Aptex,
- Vertex
- Komuro (implants have a low profile, which allows their installation both traditionally and endoscopically, through the armpit).
1.Cristalline Vertex Paragel Permanent implants, anatomically shaped, with a textured surface that is maximally adapted to the body. The implants are filled with a highly cohesive gel. They have a low level of permeability.
2.Cristalline Vertex Paragel with fixation plate Anatomically shaped permanent implants filled with silicone gel with a textured surface. Indicated for patients who have a high risk of implant displacement. The plate is sutured to the transverse abdominal muscle, costal fascia.
3.Cristalline Aptex Paragel Breast implants for reconstructive or cosmetic surgery, anatomically shaped, filled with highly cohesive gel. Textured surface. The shell consists of a medical elastomer that provides a high degree of adaptation to breast tissue. The height of the APTEX implant is less than that of the VERTEX implant.
The latest innovation is breast implants from the Matrix line. It has 9 profiles and 90 different options and sizes of anatomical implants.
Is there a protective layer of Paragel 360? eliminates sweating of the gel, and the unique technology of texturing the implant surface reduces the risk of contracture formation and promotes better tissue ingrowth.
The filler of the implants, in the form of a highly cohesive gel of different densities, helps to obtain breasts of different softness, based on the wishes of the patient.
L - low height M - medium height F - full height
1 - low profile 2 - medium profile 3 - high profile
TM F1 F – Full height, 1 – low profile
| vendor code | Width(cm) | Height (cm) | Projection(cm) | Volume (ml) |
| TM F1-120 | 9.5 | 10.0 | 3.0 | 120 |
| TM F1-140 | 10.0 | 10.5 | 3.2 | 140 |
| TM F1-170 | 10.5 | 11.0 | 3.4 | 170 |
| TM F1-195 | 11.0 | 11.5 | 3.6 | 195 |
| TM F1-225 | 11.5 | 12.0 | 3.8 | 225 |
| TM F1-250 | 12.0 | 12.5 | 4.0 | 250 |
| TM F1-290 | 12.5 | 13.0 | 4.2 | 290 |
| TM F1-320 | 13.0 | 13.5 | 4.4 | 320 |
| TM F1-370 | 13.5 | 14.0 | 4.6 | 370 |
| TM F1-420 | 14.0 | 14.5 | 4.8 | 420 |
TM M1 M – Medium height, 1 – low profile
| vendor code | Width(cm) | Height (cm) | Projection(cm) | Volume (ml) |
| TM M1-110 | 9.5 | 9.0 | 3.0 | 110 |
| TM M1-125 | 10.0 | 9.5 | 3.2 | 125 |
| TM M1-145 | 10.5 | 10.0 | 3.4 | 145 |
| TM M1-175 | 11.0 | 10.5 | 3.6 | 175 |
| TM M1-195 | 11.5 | 11.0 | 3.8 | 195 |
| TM M1-225 | 12.0 | 11.5 | 4.0 | 225 |
| TM M1-255 | 12.5 | 12.0 | 4.2 | 255 |
| TM M1-295 | 13.0 | 12.5 | 4.4 | 295 |
| TM M1-330 | 13.5 | 13.0 | 4.6 | 330 |
| TM M1-375 | 14.0 | 13.5 | 4.8 | 375 |
TM L1 L – Low height, 1 – low profile
| vendor code | Width(cm) | Height (cm) | Projection(cm) | Volume (ml) |
| TM L1-100 | 9.5 | 8.0 | 3.0 | 100 |
| TM L1-115 | 10.0 | 8.5 | 3.2 | 115 |
| TM L1-130 | 10.5 | 9.0 | 3.4 | 130 |
| TM L1-160 | 11.0 | 9.5 | 3.6 | 160 |
| TM L1-180 | 11.5 | 10.0 | 3.8 | 180 |
| TM L1-210 | 12.0 | 10.5 | 4.0 | 210 |
| TM L1-245 | 12.5 | 11.0 | 4.2 | 245 |
| TM L1-280 | 13.0 | 11.5 | 4.4 | 280 |
| TM L1-320 | 13.5 | 12.0 | 4.6 | 320 |
| TM L1-355 | 14.0 | 12.5 | 4.8 | 355 |
TM F2 F – Full height, 2 – medium profile
| vendor code | Width(cm) | Height (cm) | Projection(cm) | Volume (ml) |
| TM F1-150 | 9.5 | 10.0 | 3.7 | 150 |
| TM F1-175 | 10.0 | 10.5 | 3.9 | 175 |
| TM F1-195 | 10.5 | 11.0 | 4.1 | 195 |
| TM F1-225 | 11.0 | 11.5 | 4.3 | 225 |
| TM F1-250 | 11.5 | 12.0 | 4.5 | 250 |
| TM F1-285 | 12.0 | 12.5 | 4.7 | 285 |
| TM F1-320 | 12.5 | 13.0 | 4.9 | 320 |
| TM F1-360 | 13.0 | 13.5 | 5.1 | 360 |
| TM F1-410 | 13.5 | 14.0 | 5.3 | 410 |
| TM F1-465 | 14.0 | 14.5 | 5.5 | 465 |
TM M2 M – Medium height, 2 – medium profile
| vendor code | Width(cm) | Height (cm) | Projection(cm) | Volume (ml) |
| TM M2-140 | 9.5 | 9.0 | 3.7 | 140 |
| TM M2-160 | 10.0 | 9.5 | 3.9 | 165 |
| TM M2-180 | 10.5 | 10.0 | 4.1 | 180 |
| TM M2-210 | 11.0 | 10.5 | 4.3 | 210 |
| TM M2-235 | 11.5 | 11.0 | 4.5 | 235 |
| TM M2-270 | 12.0 | 11.5 | 4.7 | 270 |
| TM M2-305 | 12.5 | 12.0 | 4.9 | 305 |
| TM M2-350 | 13.0 | 12.5 | 5.1 | 350 |
| TM M2-385 | 13.5 | 13.0 | 5.3 | 385 |
| TM M2-435 | 14.0 | 13.5 | 5.5 | 435 |
TM L2 L – Low height, 2 – medium profile
| vendor code | Width(cm) | Height (cm) | Projection(cm) | Volume (ml) |
| TM L2-120 | 9.5 | 8.0 | 3.7 | 120 |
| TM L2-145 | 10.0 | 8.5 | 3.9 | 145 |
| TM L2-175 | 10.5 | 9.0 | 4.1 | 175 |
| TM L2-195 | 11.0 | 9.5 | 4.3 | 195 |
| TM L2-225 | 11.5 | 10.0 | 4.5 | 225 |
| TM L2-260 | 12.0 | 10.5 | 4.7 | 260 |
| TM L2-295 | 12.5 | 11.0 | 4.9 | 295 |
| TM L2-330 | 13.0 | 11.5 | 5.1 | 330 |
| TM L2-375 | 13.5 | 12.0 | 5.3 | 375 |
| TM L2-415 | 14.0 | 12.5 | 5.5 | 415 |
TM F3 F – Full height, 3 – high profile
| vendor code | Width(cm) | Height (cm) | Projection(cm) | Volume (ml) |
| TM F3-175 | 9.5 | 10.0 | 4.5 | 175 |
| TM F3-205 | 10.0 | 10.5 | 4.7 | 205 |
| TM F3-230 | 10.5 | 11.0 | 4.9 | 230 |
| TM F3-275 | 11.0 | 11.5 | 5.2 | 275 |
| TM F3-305 | 11.5 | 12.0 | 5.4 | 305 |
| TM F3-345 | 12.0 | 12.5 | 5.6 | 345 |
| TM F3-385 | 12.5 | 13.0 | 5.9 | 385 |
| TM F3-430 | 13.0 | 13.5 | 6.2 | 430 |
| TM F3-475 | 13.5 | 14.0 | 6.3 | 475 |
| TM F3-545 | 14.0 | 14.5 | 6.4 | 545 |
TM M3 M – Medium height, 3 – high profile
| vendor code | Width(cm) | Height (cm) | Projection(cm) | Volume (ml) |
| TM M3-160 | 9.5 | 9.0 | 4.5 | 160 |
| TM M3-190 | 10.0 | 9.5 | 4.7 | 190 |
| TM M3-215 | 10.5 | 10.0 | 4.9 | 215 |
| TM M3-255 | 11.0 | 10.5 | 5.2 | 255 |
| TM M3-290 | 11.5 | 11.0 | 5.4 | 290 |
| TM M3-320 | 12.0 | 11.5 | 5.6 | 320 |
| TM M3-370 | 12.5 | 12.0 | 5.9 | 370 |
| TM M3-410 | 13.0 | 12.5 | 6.2 | 410 |
| TM M3-445 | 13.5 | 13.0 | 6.3 | 445 |
| TM M3-515 | 14.0 | 13.5 | 6.4 | 515 |
TM L3 L – Low height, 3 – high profile
| vendor code | Width(cm) | Height (cm) | Projection(cm) | Volume (ml) |
| TM L3-145 | 9.5 | 8.0 | 4.5 | 145 |
| TM L3-175 | 10.0 | 8.5 | 4.7 | 175 |
| TM L3-200 | 10.5 | 9.0 | 4.9 | 200 |
| TM L3-240 | 11.0 | 9.5 | 5.2 | 240 |
| TM L3-270 | 11.5 | 10.0 | 5.4 | 270 |
| TM L3-310 | 12.0 | 10.5 | 5.6 | 310 |
| TM L3-360 | 12.5 | 11.0 | 5.9 | 360 |
| TM L3-390 | 13.0 | 11.5 | 6.2 | 390 |
| TM L3-450 | 13.5 | 12.0 | 6.3 | 450 |
| TM L3-495 | 14.0 | 12.5 | 6.4 | 495 |
EUROSILICONE breast implants filled with saline solution.
Permanent round or anatomical breast implants with saline solution.
1. Inflatable
The implants are round in shape with a smooth surface, which during surgery are filled with a saline solution through a valve located on the front of the implant. They have two profiles: low, high
Indicated for use when:
- cosmetic breast enlargement
- restoration of the shape of the mammary gland.
- when replacing an outdated or unusable implant
2.Crystalline Inflatable
Permanent breast implants with a textured surface that are filled with a saline solution during surgery through a valve located in the center of the outer surface.
They have two profiles: high, low
Indicated for use when:
- cosmetic breast enlargement;
- restoration of the shape of the mammary gland after mastectomy;
- replacing an outdated or unusable implant.
Tissue expanders "EUROSILICONE"
Tissue expanders are elastomeric silicone containers that are filled with saline solution after implantation.
produces tissue expanders for breast augmentation or reconstruction.
Tissue expanders are placed to expand the required area of tissue to prepare the cavity for the installation of a permanent implant. Expanders are made from biocompatible medical silicone elastomer.
Each expander has an injection port to which a catheter is attached. The required volume of saline solution is injected through the catheter. Expander expansion rate up to 500%.
EUROSILICONE tissue expanders have 6 configurations:
1. Round shape, smooth surface;
ES 12
| vendor code | Diameter(cm) | Projection(cm) | Valve(cm) | Volume (ml) |
| 12010 | 3.1 | 2.1 | 2.0 | 10 |
| 12120 | 7.1 | 4.8 | 2.8 | 120 |
| 12150 | 9.5 | 4.0 | 2.8 | 150 |
| 12200 | 7.9 | 5.1 | 2.8 | 200 |
| 12250 | 9.0 | 5.7 | 2.8 | 250 |
| 12300 | 10.0 | 6.3 | 2.8 | 300 |
| 12375 | 13.0 | 5.0 | 2.8 | 375 |
| 12400 | 11.0 | 6.0 | 2.8 | 400 |
| 12500 | 12.8 | 6.3 | 2.8 | 500 |
| 12600 | 13.8 | 6.7 | 2.8 | 600 |
| 12700 | 14.8 | 7.5 | 2.8 | 700 |
| 12800 | 15.7 | 6.7 | 2.8 | 800 |
| 12900 | 16.6 | 6.5 | 2.8 | 900 |
| 121100 | 17.4 | 8.2 | 2.8 | 1100 |
2. Anatomical VERTEX shape, textured surface;
Used as a temporary implant to create a cavity during breast reconstruction or augmentation. While in the breast tissue, it gradually fills with saline solution. It is possible to use them as permanent implants.
Main characteristics:
- to obtain a natural breast fold, a wide base is used;
- thinned anterior shell of the implant to allow maximum stretching;
- reinforcement of the back side of the expander with a special non-stretch sole to reduce pressure on the tissue;
- flat shape of the unfilled expander, which makes it easier to install;
ES 119
| vendor code | Length(cm) | Width(cm) | Projection(cm) | Valve(cm) | Volume (ml) |
| 119225 | 10.1 | 9.0 | 4.7 | 2.8 | 225 |
| 119250 | 10.7 | 9.5 | 4.7 | 2.8 | 250 |
| 119300 | 11.5 | 10.2 | 4.6 | 2.8 | 300 |
| 119350 | 11.9 | 10.8 | 5.1 | 2.8 | 350 |
| 119400 | 13.3 | 11.9 | 4.7 | 2.8 | 400 |
| 119500 | 13.7 | 11.7 | 5.7 | 2.8 | 500 |
| 119600 | 14.7 | 13.0 | 5.8 | 2.8 | 600 |
| 119700 | 15.9 | 14.0 | 5.7 | 2.8 | 700 |
| 119800 | 15.8 | 14.5 | 6.2 | 2.8 | 800 |
3. Crescent shape, smooth surface;
ES 19
| vendor code | Length(cm) | Width(cm) | Projection(cm) | Valve(cm) | Volume (ml) |
| 19060 | 8.5 | 6.0 | 3.9 | 2.0 | 60 |
| 19100 | 10.8 | 8.5 | 5.5 | 2.8 | 100 |
| 19125 | 10.0 | 7.0 | 4.8 | 2.8 | 125 |
| 19250 | 13.0 | 10.0 | 5.7 | 2.8 | 250 |
| 19500 | 17.0 | 12.0 | 7.8 | 2.8 | 500 |
4. Cylindrical curved shape, smooth surface;
ES 16C
| vendor code | Length(cm) | Width(cm) | Projection(cm) | Valve(cm) | Volume (ml) |
| 16C250 | 14.5 | 7.7 | 4.5 | 2.8 | 250 |
5. Cylindrical straight shape, smooth surface;
ES 16
| vendor code | Length(cm) | Width(cm) | Projection(cm) | Valve(cm) | Volume (ml) |
| 16060 | 10.0 | 3.9 | 2.7 | 2.0 | 60 |
| 16100 | 11.0 | 3.5 | 3.5 | 2.8 | 100 |
| 16150 | 10.0 | 5.4 | 4.0 | 2.8 | 150 |
| 16200 | 14.0 | 4.5 | 4.5 | 2.8 | 200 |
| 16250 | 10.2 | 7.2 | 5.4 | 2.8 | 250 |
| 16300 | 16.0 | 5.0 | 5.0 | 2.8 | 300 |
| 16400 | 17.5 | 6.0 | 6.0 | 2.8 | 400 |
6. Rectangular shape, smooth surface;
ES 14
| vendor code | Length(cm) | Width(cm) | Projection(cm) | Valve(cm) | Volume (ml) |
| 14016 | 4.0 | 2.1 | 2.1 | 2.0 | 16 |
| 14035 | 4.0 | 2.6 | 3.6 | 2.0 | 35 |
| 14050 | 5.0 | 3.0 | 3.6 | 2.0 | 50 |
| 14100 | 4.9 | 3.9 | 5.1 | 2.8 | 100 |
| 14150 | 5.8 | 4.8 | 5.0 | 2.8 | 150 |
| 14200 | 8.5 | 5.0 | 4.9 | 2.8 | 200 |
| 14300 | 10.0 | 6.0 | 6.3 | 2.8 | 300 |
| 14400 | 10.8 | 5.8 | 5.9 | 2.8 | 400 |
| 14520 | 11.7 | 7.8 | 5.4 | 2.8 | 520 |
| 14650 | 11.7 | 9.0 | 5.8 | 2.8 | 650 |
| 14720 | 14.5 | 7.8 | 5.8 | 2.8 | 720 |
| 14750 | 13.5 | 8.7 | 5.9 | 2.8 | 750 |
| 14800 | 15.5 | 8.2 | 5.8 | 2.8 | 800 |
| 14950 | 17.5 | 8.8 | 5.5 | 2.8 | 950 |
Double “Paragel” expander implant
The implant is used to restore the shape of the breast or if it is necessary to significantly enlarge the breast. The expander implant eliminates the need for repeated surgery.
Peculiarities:
- Two cavities.
The external cavity is filled with a saline solution, with which it is possible to double the original size. The internal cavity is filled with gel;
- Two profiles: low and high;
- the implant is installed in the classical way;
When manufacturing EUROSILICONE implants, strict
control over both the quality of materials, the thickness of the shell, and the strength and tightness of the valves. Each implant has its own number.
Patients who use the products immediately after surgery automatically become participants in the Warranty Program and receive a free lifetime warranty on product replacement.
Advantages of Eurosilicone over other implants
| Characteristic | Eurosilicone | Mentor | Allergan |
| Models | Round: 11 types, 219 options; Anatomical: 9 types, 12 options. | Round: 4 types, 80 options; Anatomical: 9 types, 135 options. | Round: 334 options; Anatomical: 760 options. |
| Shell layers | 13 | 3 | 7 |
| Features of the operation | The texture of the implants allows for smaller incisions, so postoperative sutures are not so noticeable | Installed through a standard incision | The implant has easily palpable marks, which allows it to be positioned correctly |
| Certificates | ISO, EU and CE | FDA, CE, ISO | FDA and ISO |
| Load | Withstands stretching and physical training. High threshold of injury | They have a soft structure and a low threshold for injury | Low threshold of injury |
| Filler | Highly cohesive gel, saline or combination | Gel | Gel |
| Guarantee | Lifetime warranty, free replacement if contracture of 3-4 degrees develops | Lifetime warranty, free replacement if contracture of 3-4 degrees develops | Lifetime Warranty |
Which implant is better to place? Let's compare Dentium, MIS and Nobel implants
The optimal solution for tooth loss is dental implantation. The cost of this procedure varies greatly, largely depending on the implant chosen. Artificial roots for future teeth can vary in cost several times.
Let's look at 3 common implantation systems from different price categories.
Implant | Dentium | M.I.S. | Nobel |
Line of implants | Dentium SuperLine | MIS M4, MIS Seven | Nobel Activ |
Manufacturer | Dentium Co, South Korea | Medical Implant System, Israel | Nobel Biocare, Switzerland |
Survival rateStarSmile rating data is provided. The survival rate of budget implants may be overestimated due to the fact that doctors prefer to place them only under good clinical conditions. And more technologically advanced and expensive systems are installed in patients with bone grafting, chronic diseases, etc. | 98% | 97% | 99,3% |
Survival rateData provided by CosmoStom | 98,1% | 98,3% | 99% |
Lifetime WarrantyGuarantee of free implant replacement in case of rejection. | + | + | + |
VersatilitySuitable for narrow interdental spaces, etc. | + | + | + |
Atraumatic apexAre there models with a flat top, which are installed when there is a high risk of injury to the mandibular nerve or maxillary sinus? | + | + | + |
CompoundThe connection to the hexagon-shaped abutment ensures high tightness. | + | + | + |
Reviews from independent expert organizationsResearch data from the independent non-profit international scientific organization POSEIDO (Switzerland, Geneva). In 2014, the organization examined 62 implant models. | “Dentium Superline (DentiumCo., Seoul, Korea) is a sandblasted/acid etched surface. Inorganic contamination of the surface with silicon was detected. The surface is moderately micro-rough, nano-smooth, homogeneous throughout the entire body of the implant.” | “Implant surface sandblasted and acid-etched with ultra-pure 23 titanium alloy with extra low impurities. There were no signs of contamination or chemical modification of the surface." | “TiUnite (Nobel Biocare, Gothenburg, Sweden) is an anodized surface with a thick layer of titanium dioxide TiO2 (>100 nm). The surface is chemically altered by integrating large amounts of phosphorus during anodization. Inorganic surface contamination with fluorides and sulfates was also detected. The surface is microporous (pores are formed during anodization), smooth at the nanolevel with extended cracks that appear during the anodization process.” |
Other research and awards | No data | In 2015 - the best results according to the criteria for processing and cleaning the surface of implants in a medical study. University of Cologne (Germany). In 2022, the Congress of the Academy of Osseointegration (Los Angeles, USA) awarded MIS with the “CLEAN IMPLANT FOUNDATION” award - as a system with a perfectly clean implant surface | “The rough surface of TiUnite implants has been described in more than 275 publications based on the results of clinical studies involving more than 13,000 patients, using 42,000 implants and a follow-up period of up to 12 years,” the Nobel website reports and provides links to study data. |
Patient information supportAvailability of an official Russian-language website with useful information that can be understood without medical education. For patients, this is an opportunity to receive a qualified, reliable answer to their questions without repeated visits to the doctor. | — | + | + |
In the worldData on the prevalence of the implant in different countries of the world are indicated for 2022. Information taken from the official websites of manufacturers. Widespreadness indicates the recognition of the brand by doctors around the world. This factor is also important for those patients who are planning to move to another country. | Russia, China, Canada, Australia, etc. 10 countries + European Union. | 72 countries of the world | The most common brand of implants in the world. |
Own developmentsThe company develops innovative technologies in the field of implantology, and not only uses existing ones. | No data | + | + |
Surface | Rough SLA surface – sandblasting using coarse abrasive + acid etching. Proven and most widely used technology. | Rough SLA surface – sandblasting using coarse abrasive + acid etching. Proven and most widely used technology. MIS use well-known technology, but have brought its result to an ideally pure level. | Unique patented oxidized TiUnite surface |
All-on-4Prosthetics on 4 implants with complete absence of teeth | + | + | All-on-4 technology was developed by Nobel Biocare. Nobel implants are ideal for this type of treatment. |
Start of data collectionShows how long the company conducts research and observes the behavior of its implants after installation, long-term consequences and service life. | 2000 | 1995 | 1962 |
Summary | Dentium are inexpensive implants for most clinical cases. | MIS are universal implants with the cleanest surface, used when there is a risk of rejection. | Nobel - high-tech premium implants for complex clinical situations. |
Manufacturer's Warranty
Patients receive a lifetime guarantee on implants. After the operation, the data is entered into the database. After this, the warranty program begins to operate. The manufacturer on its official website talks about clients who have been wearing breast implants without adjustment for more than 10 years, and this is an indisputable indicator of quality.
Free replacement is provided in the following cases:
- when the shell ruptures;
- when capsular contracture of grades 3 and 4 occurs.
Product advantages
What are the advantages of such endoprostheses? Among the positive qualities of the product are:
- high quality;
- the ability to choose from a wide range of models;
- lifetime warranty from the manufacturer;
- wide range of sizes;
- lack of contouring during operation, the implant cannot be palpated;
- compliance with the strictest international standards;
- the presence of additional shells that ensure reliability and prevent the risk of device rupture during operation.
A huge number of positive qualities make this product popular in mammoplasty. Each woman can choose the best option for herself, creating the ideal breast shape and structure.
Laboratory tests
The modern laboratory is the pride of the company. She is responsible for product quality control. It checks each implant using two methods.
With a static load, the implant is subjected to a weight of up to 1.5 tons. After this, it should regain its previous shape without deformation.
Tensile testing is carried out using the dynamic method . Using a scalpel and a machine, a strip of the implant shell is cut out and placed in a special apparatus. The device stretches and simultaneously records the indicators.
Eurosilicon is tested with a force of 600%, although according to Russian GOST 500% is sufficient.
Video: crash test of Eurosilicon implants
Preparing for surgery
Before performing mammoplasty, a comprehensive examination is required. After this, the doctor decides whether the operation is possible or not.
Required list of tests:
- ECG;
- general urine analysis;
- testing for HIV, RW, hepatitis B, C;
- coagulogram;
- biochemical and general blood tests;
- fluorography;
- Ultrasound of the mammary glands;
- blood type, Rh factor.
If necessary, a consultation with a mammologist and anesthesiologist is carried out.
How to choose the right implant?
Today, dental clinics offer dozens of brands and models of dental implants. For most patients, the main factor when choosing implants is cost. It’s quite difficult to blame them for this. As already mentioned, the price difference between different models can be very large. For example, elite implants from Straumann or Nobel Biocare are on average more than twice the cost of implants produced in South Korea and Israel.
On the other hand, the survival rate of economical implants is also very high, since they are made from modern titanium alloys (for example, grade 4), and, as a rule, have a modern SLA coating, which helps ensure high-quality osseointegration. Economy class implants may well be recommended in standard clinical situations. This means that the doctor did not find any nuances that complicate obtaining a high-quality functional and aesthetic result.
It cannot be said that inexpensive implants “give in” to the slightest difficulties, however, in unusual situations, doctors most often recommend luxury implants. Thanks to advanced technological solutions that are designed specifically for implantation if the patient has certain limitations, the problem is solved better, and the doctor achieves a more predictable result.
Situations when it is better to use premium implants:
- implantation for bone deficiency;
- implantation in the presence of narrow interdental spaces;
- implantation of anterior teeth when achieving ideal aesthetics is required;
- The patient is allergic to titanium.
How is the operation performed?
There is a classification of the operation according to the type of surgical approach, taking into account the location where the incision is made:
- under the mammary gland;
- along the edge of the areola;
- through the armpit.
The implant can be located under the gland or muscle
The implant is placed under the breast tissue, pectoralis major muscle or its membrane.
The course of the operation may vary depending on the characteristics of the patient. Also, the nuances are determined by the selected type of access. Mammoplasty takes 1–2 hours. The patient remains in the hospital for 1-2 days for postoperative observation.
Consider the installation of an implant, which is carried out through an incision under the breast.
Operation stages:
- The patient is marked and put under anesthesia.
- Incisions are made according to the markings.
- A pocket is formed for installing the implant.
- An implant is placed in the pocket.
- Then the drainage is connected.
- The incision is sutured and a bandage is applied.
If necessary, breast plastic surgery is combined with other types of surgery: breast lift, liposuction, or repositioning of the nipples.
Types of implants
A huge selection of POLYTECH breast implants allows you to select endoprostheses in full accordance with the anatomical features and wishes of the patient and create a bust that looks and feels indistinguishable from a natural one.
Shell
Surface options:
- POLYsmoooth - smooth shell of implants (currently used quite rarely and is considered obsolete);
- MESMO sensitive is a microtextured surface that reduces the risk of capsular contracture (formation of fibrous tissue around a foreign body) and seroma (accumulation of serous fluid in the suture area).
- POLYtxt is a textured, rough surface that prevents the formation of keloid tissue and ensures reliable fixation of the endoprosthesis.
- Microthane is a special micropolyurethane shell that is maximally compatible with human tissue. Minimizes the risk of displacement and rotation of a foreign body.
According to laboratory studies, POLYTECH polyurethane implants not only reduce the likelihood of foreign body displacement to zero, but also significantly reduce the risk of developing postoperative complications. During the restoration process, the connective tissue grows into the polyurethane foam matrix, which prevents the formation of fibrous areas. Over almost 20 years of using materials with a similar shell, complications were observed in less than 0.8% of women.
Maximum strength and elasticity of the shell of POLYTECH breast implants is achieved through eight layers of material. The presence of a special barrier coating greatly increases the safety of the implant and eliminates the possibility of penetration of silicone gel molecules into the body tissues.
Form
Breast implants, regardless of the shell material, can be made in one of four forms:
- Meme - dome-shaped dentures with a round base, allowing you to get the most curvy shapes.
- Replicon are anatomical implants with a round base, mainly used to shape the breasts of adult women with a normal build.
- Optimam - anatomical products with a shortened base, allow patients with excess weight to achieve the most natural result.
- Opticon - anatomical oblong shape is ideal for slender, athletic women. Such implants are not felt at all even with high physical activity and look harmonious even on girls with a very narrow chest.
On the inside, all products have a slightly concave shape, due to which the most snug fit of the foreign body to the mammary gland or pectoral muscle is achieved.
Profile
Depending on the physiological characteristics of the patient, the profile of transplanted products is also selected:
- TLS (low) - for petite ladies with a narrow chest;
- TMS (medium) - the most common option, also used for severe breast ptosis;
- THS (high) - with significant prolapse of the mammary glands, it allows you to tighten the bust without cutting off excess dermis;
- TXS (extra tall) - suitable for women who want to get the most curvy shape.
Filler
The filler is a highly cohesive silicone gel, which instantly restores its original shape after moderate mechanical impact, gives the natural softness of the female breast and does not leak if the shell is damaged.
In addition, the company produces special two-gel implants DiagonGel 4Two, filled with EasyFitGel and ShaparGel. The first ensures a tighter fit of the endoprosthesis to the chest and maintains its natural shape during active movements and sports, the second creates a push-up effect and promotes the anatomically correct position of the nipples without additional correction.
The lineup
The POLYTECH Health & Aesthetics line of breast implants includes:
- 236 forms of endoprostheses with different ratios of profile, height and width;
- four styles of breast implants with four projections;
- three types of shells (smooth, microtextured and micropolyurethane);
- 28 sizes of special expanders (products for pre-stretching the skin);
- 144 sizes of sizers (prosthetic simulators), corresponding to most of the presented implants.
Since 2008, the company has introduced an innovative modular system to describe its product line. This greatly facilitated the selection of the necessary materials and made it possible, even at the consultation stage, to clearly explain to patients exactly what breast shape they could get as a result of plastic surgery.
Recovery period
After the operation, the patient is advised to wear compression garments for a month. It facilitates recovery, relieves pain and promotes the proper formation of tissue around the implants. The pain goes away within 7-10 days, but can last up to 2-3 weeks.
Compression garments after mammoplasty reduce the risk of complications
The first week after surgery there is a feeling of heaviness, swelling of the mammary gland, and numbness. Swelling and bruising may remain on the chest.
To avoid complications during the rehabilitation period, it is necessary to strictly follow the recommendations of the attending physician:
- do not lift heavy objects, avoid physical activity;
- rest more;
- refrain from playing sports for 2-3 months;
- take a shower no earlier than a week after surgery;
- For 1.5 months you need to refrain from going to the bathhouse and sauna, and do not sunbathe.
As with other surgical interventions, breast augmentation carries a risk of complications, including bleeding, inflammation, or infection. To prevent such consequences, antibacterial medications are prescribed.
The result is assessed after 3 months, when the postoperative swelling completely subsides and the sutures are completely healed.
Contraindications
Contraindications are conventionally divided into absolute and relative.
The first include:
- pregnancy and recent completion of lactation;
- chronic organ diseases;
- disturbances in the functioning of the cardiovascular system;
- varicose veins;
- oncology;
- poor blood clotting.
Relative contraindications:
- diabetes;
- hypertension;
- glaucoma;
- autoimmune diseases;
- obesity;
- age up to 18 years.
Cost of Eurosilicone implants
The average cost of round implants is 56 thousand rubles, and anatomical ones – 92 thousand rubles.
Cost including surgery in Moscow
| Clinic name | price, rub. |
| Peace Hospital | From 250,000 |
| Doctor plastic | From 300,000 |
| Federal Center for Plastic Surgery and Cosmetology | From 250,000 |
| New me | From 260,000 |
| GarantClinic | From 230,000 |
Cost including surgery in St. Petersburg
| Clinic name | price, rub. |
| Media aesthetician | From 200,000 |
| Center for Reconstructive, Restorative and Plastic Surgery | from 250,000 |
| Rami | From 225,000 |
| Copper | From 200,000 |
| Scandinavia | From 260,000 |
Photos before and after
Photos before and after breast augmentation with Matrix Eurosilicone implants No. 1
Photos before and after breast augmentation with Matrix Eurosilicone implants No. 2
Photos before and after breast augmentation with Matrix Eurosilicone implants No. 3
Photos before and after breast augmentation with round implants Eurosilicone No. 1
Photos before and after breast augmentation with round implants Eurosilicone No. 2
Popular questions
Which form of Eurosilicone implant is best to choose?
It all depends on the client’s wishes. Round ones are installed to emphasize the upper pole. Teardrop-shaped ones look more natural and have an anatomical shape.
Is it necessary to replace Eurosilicone implants over time?
There is no expiration date or replacement date. If there are no indications, then you can live with the implant for the rest of your life.
What happens to enlarged breasts that have Eurosilicone implants installed during pregnancy and lactation?
The presence of implants does not affect the functions of the mammary gland.
Is it possible to feel a Eurosilicone implant in the breast?
The implant can only be felt in certain body positions. The correct choice of size and proper installation guarantee maximum naturalness both visually and to the touch.
Can a Eurosilicone implant turn over?
Yes, this is possible, but only as a last resort if you do not follow the doctor’s postoperative recommendations.
What you need to know when choosing breast implants
Many websites provide sizing tables for endoprostheses, using which patients try to independently select the implants they need. In most cases, this turns out to be a waste of time and effort, since only an experienced surgeon can choose the desired shape, size and profile and only after a personal examination of the patient.
Selection factors:
- body parameters;
- original shape and size of the bust;
- the amount of dermis, muscle and fat layer;
- volume and density of the mammary glands;
- lifestyle and physical activity of the patient;
- woman's personal wishes.
When changing the volume of the bust, it is worth considering that during primary plastic surgery it is not recommended to enlarge the breasts by more than three sizes. Installing larger implants can cause damage to the skin, muscles and other tissues.
Calculations for choosing endoprostheses
If a woman still wants to try to independently select the desired shape and size of silicone implants, she can try taking a number of simple measurements at home.
- Line A is straight between the jugular notch and the navel.
- Line B is straight along the inner edge of the mammary gland, parallel to line A.
- Point 1 is the intersection of line B and an imaginary straight line passing through the center of the nipple.
- Line B is the upper border of the mammary gland. In most women it is located in the area of the third rib.
- Point 2 is the intersection of line B and an imaginary straight line passing through the center of the nipple.
- Line D is a skin fold under the mammary gland, usually located 4-6 cm below the areola of the nipple. You also need to put point 3 on it (the point of intersection with an imaginary perpendicular line from the center of the nipple).
- Line D is the outer edge of the mammary gland, corresponds to the anterior axillary line. Here we also draw a straight line from the center of the nipple and mark point 4.
Points 1, 2, 3 and 4 give an idea of the internal boundaries of the cavity that the surgeon will create during the operation to install the selected implants. Based on the distance between points 1-4 and 2-3, the required size of endoprostheses is selected. The use of smaller or larger foreign bodies often results in contouring and an unnatural appearance of the new bust.
Sizers (try-on implants) allow you to ensure the correct choice of size and shape of grafts. They are smooth silicone pads, which, together with a special compression top, help to see the desired effect before the planned plastic surgery. 3D modeling, augmented reality technology or the 3D-Form computer system also helps to evaluate the result in advance and make the necessary adjustments.
Opinions of plastic surgeons
Plastic surgeons speak positively about Eurosilicone implants.
This doctor compares manufacturing companies and does not recommend chasing new products. It’s better to trust those that have been on the market for a long time.
Another surgeon supports his colleague’s opinion and names Eurosilicone among the main market leaders.
The doctor prefers Eurosilicone, pointing out the accuracy of the calculations for the location of implants.
Rating of dental implants by manufacturer
Below we present a rating of implants, which indicates the most common systems in Russia. Please note that we do not rank each brand in a specific place, since without taking into account individual nuances, it is difficult to determine the best among equals. All brands are divided into categories that we have identified based on information from open sources about various implant systems, research data and expert opinion. For each item a certain number of points were awarded on a ten-point system.
Market Kings
Nobel Biocare, Astra Tech and Swiss Straumann implants are considered the three most famous systems in the world. These manufacturers have been on the market for a very long time and are at the forefront of technological solutions. Their implants allow you to count on good functional and aesthetic results even in extremely difficult cases. For all points except one (accessibility), they were given the maximum number of points.
Astra Tech (Sweden/USA)
| Survival rate | Prosthetics | Engraftment time | Indications for installation | Affordability |
| More than 99.9% (10 points) | 10 points | 10 points | 10 points | 4 points |
Straumann (Switzerland)
| Survival rate | Prosthetics | Engraftment time | Indications for installation | Affordability |
| More than 99.6% (10 points) | 10 points | 10 points | 10 points | 4 points |
Nobel Biocare (Switzerland/USA)
| Survival rate | Prosthetics | Engraftment time | Indications for installation | Affordability |
| More than 99.3% (10 points) | 10 points | 10 points | 10 points | 4 points |
Business class systems
The brands of implants listed below, in their clinical characteristics, are as close as possible to dental implants Nobel, Straumann and Astra Tech, but are inferior in some respects or do not have as many unique developments and solutions in their arsenal.
Xive (Germany–USA)
| Survival rate | Prosthetics | Engraftment time | Indications for installation | Affordability |
| More than 99.5% (9 points) | 9 points | 8 points | 9 points | 6 points |
Xive Ankylos (Germany–USA)
| Survival rate | Prosthetics | Engraftment time | Indications for installation | Affordability |
| More than 99% (9 points) | 9 points | 9 points | 9 points | 6 points |
Impro (Germany)
| Survival rate | Prosthetics | Engraftment time | Indications for installation | Affordability |
| More than 98% (9 points) | 10 points | 9 points | 8 points | 6 points |
Biohorizons (USA)
| Survival rate | Prosthetics | Engraftment time | Indications for installation | Affordability |
| More than 97.3% (9 points) | 8 points | 8 points | 8 points | 6 points |
NDI Medical (Germany)
| Survival rate | Prosthetics | Engraftment time | Indications for installation | Affordability |
| About 99.4% (8 points) | 7 points | 7 points | 7 points | 10 points |
Patient reviews
Most patients leave positive feedback about implants.
This girl is very pleased with the result, and is especially pleased with the reliable guarantee.
This also talks about the reliability of implants using the example of installing them on a loved one.
Another patient focuses on the quality of Eurosilicon products.
